header
Hamby's Light
light duty 4light duty 9
The Hamby's Light was developed as a self-installed, alternative version of the original Hamby's Protector Beaching Bumper.

Call right now to order: 1-800-742-2813 or email Hamby's Marine Products.
Hamby's Light Specs
  • Super Tough Urethane
  • Injection Molded one at a time.
  • 3M VHB (Very High Bond) Adhesive
  • 5/16" Thick
  • 6 feet long by 5 inches wide
  • Tapered edge enhances the appearance
  • Available colors: Black and Dark Gray
  • Easy to Install!!
  • Backed up by the Hamby's name, the leader in the keel protection industry
The Hamby's Light is made from the same material as the original Hamby's Protector Beaching Bumper. Both are made from Super Tough Urethane, the same substance most automobiles are using to protect their steel and chrome.

We injection mold the Hamby's Light product and then we epoxy on the 3M adhesive. This provides superior bonding capabilities, and prevents the tape from coming loose.
The Hamby's Light will look great on your boat!! The tapered edge enhances the appearance.

READ WHAT SOME OF OUR CUSTOMERS HAVE TO SAY

image1
"I received the Hamby's Light on 4/23 and installed it that evening. It took me a little over an hour doing it alone and being very careful to prepare the boat correctly. That time included removing the spare tire for access and then replacing it afterwards. I'm very pleased with how it looks on my boat. I've had it on the water 4 or 5 times since installation and it seems to be doing fine. I'm attaching a picture in case you're interested. This is a 1996 Stratos 278V."
Billy Matthews - Coats, North Carolina

"Thanks for helping me get the tip of my protector installed properly. I just wanted to let you know that the Hamby's Light is the best accessory I have added to my boat. I have never had a keel protector on a boat until this one and I will have to admit that I was pretty nervous beaching the boat on the ramp after I had launched it. When I took the boat out of the water, I just had to crawl under there to see if there were any scratches on the boat. Of course, the protector worked perfectly and the boat still looked like new. I will never have another boat without a Hamby's. I may get the dealer installed version next time since I may be beaching a little more often then I thought. I have told all of my friends they need to get one too. You have a great product and super service!"
Stephen Danner - Tennessee

image1
I want to provide a little feedback on the experience of purchasing and installing Hamby's Light. I placed the order on May 23rd and received it on May 29th. I installed the Hamby's Light that evening. The directions were easy to follow. The installation time was 55 minutes from start to finish and I was taking my time. It looks great. Thanks.
Jim Leisge - Sugar Hill, Georgia

image1
"I have attached some photos of the finished install of the Hamby's Light on my 1998 Ranger 692 VS. It looks great."






Gary Kirby - Huddleston, Virginia

image1light duty 2
"After evalutaing my protection needs and comparing products, I became sold on the Hamby's. I purchased my Hamby's Light from Red Wing Boat Co. and immediately went home to begin the project. Well, I got underneath the boat to evaluate the position, when I noticed a chip the size of a nickle in the gel coat exposing the fiberglass. It was at that point I realized I waited too long to purchase my Hamby's. After some gelcoat repairs on the chip and some deep scratches, I was ready to begin the installation. I used 80 grit sandpaper to prep the surface, then used acetone to clean up. I checked the temperature of the hull and it was sitting at around 72degF so I decided to warm it up. I took the wife's blow dryer and heated the hull to 80degF. I started at the top and carefully worked my way under the boat using a heavy duty roller to apply the pressure. I went back and forth over the protector applying solid pressure to make sure the entire protector made good contact with the hull.
I am very pleased with the outcome. It looks great, went on straight and will give me the protection I was looking for. Plus for a "do-it-yourself" kind of person, it makes for a neat little project well worth the money. Thanks for the great product!!"
Joel Babin - Houston, TX

If you require a self-installed version of the original Hamby's Protector Beaching Bumper, then consider purchasing the new: Hamby's Light

The Hamby's Light will not take the place of the original Hamby's Protector Beaching Bumper. If you beach your boat over and over, for maximum protection you need to purchase the original Hamby's Protector Beaching Bumper. Call 1-800-742-2813 for the location of your closest installing dealer or click here to go to a links page for authorized dealers with websites.
ORDER ONE TODAY
  • Improve the resale value of your boat
  • Decrease the repair costs for your boat
  • The Hamby's Light pays for itself
We accept Visa or MasterCard. C.O.D. shipment is also available for an additional charge (C.O.D. shipments available by telephone only).

$199.95 per protector

CALL US NOW 1-800-742-2813 or EMAIL Hamby's Marine Products